Quick Answer: How Do I Setup My BT Home Hub 5?

How do I connect my BT Hub to the Internet?

Connecting your computer to your BT Hub using the wireless keyFirst, make sure your computer has wireless turned on.Go to Start and click on Control Panel.

Now select Connect to a network.Right click on the “Wireless Network Connection” icon at the bottom of your screen, then click on View Available Wireless Networks.More items….

How do I setup my BT Home Hub 5 as a repeater?

The HH5 can be used as a wireless repeater and has to be connected to the router via an ethernet cable, connect the 2nd hub to your pc via the ethernet port, access BT Home Hub Manager on the iP address of 192.168. 0.154 in the DHCP server settings change eneable from yes to no then apply.

What is the difference between BT Smart Hub and Smart Hub 2?

BT has a new Hub – the BT Smart Hub 2 – which it claims is the most powerful Wi-Fi hub of all the big broadband providers. While the size and premise remains much the same as the previous Smart Hub, the move to a rounded detail in the centre of this hub gives a strong hint as to what it wants to do.

How do I connect my phone to my BT Home Hub?

Make a note of your Hub’s wireless network name and password. They’re on the back of your Hub. Your Hub will be called something like BT-XXYYXX. If your device supports WPS, just press the WPS button on your Hub – it’s a quick way to connect.

What is the USB port for on BT Home Hub 5?

The BT Home Hub supports port forwarding. The BT Home Hub versions 3, 4 and 5 may be used for access to files stored on an attached USB stick – USB 2.0 is supported. The server by default has the address File://192.168.1.254 and is available to the entire network.

Does BT Smart Hub 2 need a modem?

Smart Hub 2 has a modem built in but has no WAN port to use your own router through the Smart Hub modem. There is no way to enable ICMP port on modem in BT Smart Hubs, which prevents BT customers access networking tools like Think Broadbands Network Performance Monitor.

What cable do I need to connect computer to router?

To connect a router to your computer with an Ethernet cable:Plug one end of an Ethernet cable into your modem.Plug the other end of the Ethernet cable into the Internet, Uplink, WAN or WLAN port on your router.Plug in your router and allow at least 2 to 3 minutes for it to light up.More items…