Question: How Do I Reset My QC DVR Password?

What is the default password of DVR?

1.

Use the DVR factory default passwordDVRUserPasswordHDLadmin12345Hikvisionadmin12345IvioadminMultitocadmin8888888832 more rows•Mar 1, 2018.

How do I reset my Cobra surveillance password?

With the power off, hold the POWER and STOP buttons on the front panel. Keep these held in and turn the power on. Wait for one beep, then a second beep before releasing the buttons. After booting, the password will be reset to 111111.

How do I reset my XMeye DVR password?

XMeye password reset / iDVR H264 resetGo to your DVR and bring up the login screen.Click the ?Write down the key number at the bottom left of the screen.Download CCTV Super Password app.The tool will generate a master password, in our case the master password is 335377.Enter the master password to the recorder.

How do I reset my H 264 DVR password?

Password Reset InstructionsFirst, make sure that the unit is turned off.Then press and hold any button on the included infrared remote control.While holding the button on the remote, power on the unit.You should hear a single beep followed by a double beep.More items…

How do I log into my IP camera?

How to view your IP camera remotely via a web browserOpen a web browser and type the IP address. … Go to SETTING > BASIC > Network > Information to find the HTTP port number used by the camera. … After you change the port, you will need to reboot the camera in order to save the changes. … After you reboot, log back into the camera on your web browser, using.More items…•

How do I reset the password on my DVR?

To reset password of your CCTV DVR press and hold the ENTER button for 15 to 30 second until the DVR restart’s. After the restart you DVR default wizard will come up the same way like if you are setting up the DVR for the first time.

How do I reset my DVR to factory settings?

Factory Reset InstructionsFirst, make sure that the unit is turned off.Then press and hold any button on the included infrared remote control.While holding the button on the remote, power on the unit.You should hear a single beep followed by a double beep. … Now that the DVR is booted, it will be set to the factory default settings.

How do I unlock my DVR account?

Reboot the DVR by using the rear toggle switch or by unplugging. When the unit powers back on try and login with the default username and passwords. If neither of these passwords get you into your system you will need to email us at Support@CCTVSecurityPros.com and request a Master Password.

What is IP camera activation password?

In earlier versions of the firmware (to version 5.3. 0) IP cameras HIKVISION supplied to IP address 192.0. 0.64 and the default password is 12345. Starting with version 5.3. … 0 and above before connecting to the network need to “activate” because they come from the factory without password (not active).

How do I change my IP camera password?

To change the password on an IP camera:Log into the camera using Internet Explorer or Firefox web browsers with the current administrator password. … After logging into the camera, go to the Configuration tab. … Choose the desired user and click on the Modify button. … Enter the new password.More items…

How do I reset my password for my WiFi camera?

To restore your HD WiFi camera password: Use a small, pointed object such as a pin to press and hold the Reset button located behind the camera. Hold the Reset button until the camera’s status LED flashes Red three times and then remains solid red.

How do I reset my QVIS DVR password?

I successfully reset my password using the following method : On the NVR login box click the ‘Forgot Password’ padlock. This will bring up another box showing a QR code. Scan the QR Code that appears on screen. … The result will give you a long list of letters, numbers and characters.